NTN 6328Z deep groove ball bearings

db min.:149 mm; D:280 mm; Limiting speed:2400 r/min; Calculation factor Y2:1.2; Reference speed:1300 r/min; d:130 mm; T:164 mm; b:8 mm; Cb min.:28 mm; Basic dynamic load rating C:1110 kN;

replacement bearing:UE205-15; B:3.7500 in; radial dynamic load capacity:2150 lbf; locking device:Accu-Loc; lubrication type:Lubrication Fitting; housing material:Cast Iron; d:0.9375 in; duty type:Standard Duty; D:3.0000 in; mounting type:Two-Bolt Flange;

length through bore:2.28 in; duty type:Medium Duty; mounting type:Four-Bolt Flange; finish/coating:Uncoated; radial dynamic load capacity:9755 lb; series:211; bore type:Round; locking device:Set Screw; seal type:Contact Seal; housing material:Cast Iron;

d:3/16 in; overall length:5/16 in; manufacturer catalog:Click here; standards met:SAE 841, CT-1000-K26; material specification:Oilite®, Synthet; operating temperature range:-35 °F to +; sleeve bearing type:Plain Sleeve; maximum p value:Static 8000 / D; maximum v value:120

Dynamic Load Rating (kN):321.1; Availability:In Stock; Weight:12.15 KGS; d:200mm; D:310mm; Clearance:Standard; Speed Rating (r/min):3700; Static Load Rating (kN):281.1; B:51mm; SKU:3mm9140wicrdul-timke;

D:160 mm; d:65 mm; precision rating:Not Rated; finish/coating:Uncoated; row type & fill slot:Double-Row Non-Fill; closure type:Open; outer ring width:2-13/16 in; B:2.8125 in; bore type:Round; internal clearance:C0;

dynamic load capacity:2450 lbf; seal type:Contact with Slinger; lubrication type:Lubrication Fitting; housing material:Cast Iron - Nickel P; slot spacing:2.0000 in; locking device:Set Screw; rod hole diameter:3/4 in; d:0.7500 in; series:MUCST200NP; overall length:3-11/16 in;

Oil Limiting Speed (r/min):12000; B:16mm; Static Load Rating (kN):4.65; Dynamic Load Rating (kN):15.8; Seals or Shields:Open Type; D:62mm; Weight:0.02 KGS; Availability:In Stock; SKU:1206kjc3-nsk; Grease Limiting Speed (r/min):10000;

Cap bolt, SAE grade:8; Max. speed for Taconite seal:900 r/min; R2:30.163 mm; Taconite seal:TER 100; H2:53.975 mm; P120°:72.5 kN; P60°:185 kN; J min.:336.55 mm; PG:1/4 NPT; H:258.762 mm;

flange mounting type:4-Hole Flange Block; cage material:Nylon; seal type:Contact; bearing type:4-Hole; housing material:Ductile Iron; inner ring width:Wide Inner Race; insert bearing type:Eccentric Lock - Wid; d:1.9375 in; manufacturer upc number:662798387505; duty type:Standard Duty;

D:400 mm; d:260 mm; B:104 mm; manufacturer upc number:087796296350; cage material:Brass Cage; internal clearance:C0; bore type:Straight;

manufacturer upc number:029176501678; d:70 mm; D:120 mm; internal clearance:C4; bore type:Straight; closure type:Open; B:31 mm; cage material:Steel;